Category
Category
Basic cylinders
● Φ8 to 40 mm [0.315 to 1.575 in] cylinder bore. A new cylinder with direct mounting for minimal size and minimal weight. Basic cylinders in a wide range of variations that allow creation of just about any type of production process. H1 grease standard compliant.
Jig cylinder C series
● Φ6 to 100 mm [0.236 to 3.937 in] cylinder bore. Short, thin body designed for total space saving. Extensive lineup includes a total of 15 variations.
Jig cylinder C series stroke adjustment type
● Φ12 to 40 mm [0.472 to 1.575 in] cylinder bore size. The world's first stroke adjustment cylinder, the push side stroke can be adjusted by rotating the adjuster gear.
Jig cylinder C series low-friction cylinders
● Φ6 to 40 mm [0.236 to 1.575 in] cylinder bore. A low friction cylinder with a short, thin body designed for total space saving.
Slim cylinders DA series
● Φ16 to 63 mm [0.630 to 2.480 in] cylinder bore. Stainless steel tubing for high quality and high reliability that sets the standard for small and medium size cylinders. Extensive lineup includes a total of 21 variations.
Pen cylinders PBDA series
● Φ2.5 to 16 mm [0.098 to 0.630 in] cylinder bore. Complies with all model non-ion standards. A total of 17 variations, from single and double acting types, to types with stroke adjustment mechanisms.
Knock cylinders NDA series
● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Short body and versatile mounting creates a simpler mechanical device.
Mini bit cylinders MBDA series
● Φ4.5 to 10 [0.177 to 0.394] cylinder bore. Approximately 41% shorter length, 67% smaller volume. (Compared with Koganei multi mount cylinders.)
Multi mount cylinders BDA series
● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. A square and compact body, and mounting brackets provides plenty of mounting versatility. Non-rotating type meets a wide variety of high non-rotating accuracy needs.
High multi cylinders YMDA series
● Φ6 to 20 mm [0.236 to 0.787 in] cylinder bore. Square body and six-side mounting enable compact and direct mounting.
Twin rod cylinders TDA6 series
● Φ10 to 32 mm [0.394 to 1.260 in] cylinder bore size. Original rotation-less cylinder that integrates two cylinders into a compact configuration.
Alpha series twin rod cylinders ATBDA series
● Φ10 to 32 mm [0.394 to 1.260 in] cylinder bore size. Two rods do not require guides. A linear ball bearing maintains high non-rotating accuracy and tip deflection accuracy, even at full stroke.
Twin port cylinders TWDA series
● Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Dual tube structure centralizes connection ports on a single side and eliminates dead space.
DYNA cylinders
● Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. A wide range of series configurations and mountings that meet ISO standards make this the standard for tie rod medium-size cylinders.
KSD cylinder
● Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. A lineup of a wide range of variations and choice of aluminum or iron main unit tubing.
Swing cylinder SDA series
● Φ25 to 40 mm [0.984 to 1.575 in] cylinder bore. Both oscillation and linear functions incorporated into a single unit. Individual control enables both alternating and simultaneous linear and oscillatory movement.
Twist cylinders RHDA series
● Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. In a single action, the rod moves forward while simultaneously rotating 90 degrees. Slim body and one-location piping ports for a space saving design.
Vacuum pad equipped multi mount cylinders
● Φ10 to 16 mm [0.394 to 0.630 in] cylinder bore size. Integration of a vacuum pad and cylinder into a single unit and a hollow shaft structure enables a very small overall length and small operation that fully meets a variety of vacuum system suction and handling, and other needs.