Category
Category
Double acting type
● Φ20 to 50 mm [0.787 to 1.969 in] cylinder bore. Stainless steel tubing for high quality and high reliability that sets the standard for small and medium size cylinders.
Single acting push out type
● Φ32 to 40 mm [1.260 to 1.575 ini] cylinder bore. Single acting type with integrated return spring. Stainless steel tubing for high quality and high reliability.
Double acting double rod type
● Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Stainless steel tubing for high quality and high reliability.
Square rod double acting type
● Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Square type non-rotating piston rod. Stainless steel tubing for high quality and high reliability.
Double acting block type
● Φ16 to 63 mm [0.630 to 2.480 in] cylinder bore. Block type that does not require a mounting bracket. Stainless steel tubing for high quality and high reliability.
Double acting block Square rod type
● Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Does not require a mounting bracket. Square rod makes it non-rotating.
Double acting block with variable cushion type
● Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Block type that does not require a mounting bracket. An integrated air cushion absorbs impact force at the stroke end.
Double acting multi position type
● Φ20 to 40 mm [0.787 to 1.575 in] cylinder bore. Two cylinders can be linked in series and three stop positions can be specified. Stainless steel tubing for high quality and high reliability.
End keep double acting type
● Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure.
Double acting block end keep type
● Φ16 to 63 mm [0.630 to 2.480 in] cylinder bore. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure.
Double acting brake type
● Φ20 to 40 mm [0.787 to 1.575 in] cylinder bore. Cylinder with brake mechanism to maintain intermediate stop and position.
Double acting pull, push stroke adjustment type
● Φ20 to 40 mm [0.787 to 1.575 in] cylinder bore. Cylinder with stroke limiting stopper. An adjustable type lineup for both pull side and push side.
Dual stroke double acting pull type
● Φ20 to 40 mm [0.787 to 1.575 in] cylinder bore. Two cylinders can be combined back-to-back for two operation strokes. Stainless steel tubing for high quality and high reliability.
Low hydraulic pressure: Double acting type
● Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Pneumatic-hydraulic converter can be used for simple low-speed operation control of a cylinder operated by low hydraulic pressure.
Valpack double acting type
● Φ20 to 40 mm [0.787 to 1.575 in] cylinder bore. Integrated solenoid valve and cylinder for less wasted air consumption within piping and reduced piping work requirements.
Double acting type heat resistant type
● Φ20 to 40 mm [0.787 to 1.575 in] cylinder bore. Fluorine packing enables operating temperatures up to 130 degrees. However, a sensor switch cannot be equipped.
Double acting low speed type
● Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Low-speed type with an operating speed range from 10 mm/s [0.394 in/sec].
With scraper double acting type
● Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Scraper added to the rod packing prevents entry of outside foreign matter for wider ranging application potential in a variety of environments.
Block type heat resistant specification: Double acting type
● Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Fluorine packing enables operating temperatures up to 130 degrees. However, a sensor switch cannot be equipped.
Block type low speed specification: Double acting type
● Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Low-speed type with an operating speed range from 10 mm/s [0.394 in/sec].
All stainless steel specification: Double acting type
● Φ20 to 40 mm [0.787 to 1.575 in] cylinder bore. Stainless steel used for components for improved corrosion resistance.