Category
Category
Double acting type
● Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. A wide range of series configurations and mountings that meet ISO standards make this the standard for tie rod medium-size cylinders.
Non-rotating double acting type
● Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Hexagon type non-rotating piston rod.
Double acting double rod type
● Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. Conforms to ISO standards. Cylinder with piston rods on both ends of the piston.
Non-rotating double acting double rod type
● Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with non-rotating hexagon type piston rod and piston rods at both ends of the piston.
Double acting multi position type
● Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be linked in series and three stop positions can be specified.
Dual stroke double acting pull type
● Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be combined back-to-back for two operation strokes.
Double acting push stroke adjustment type
● Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper.
Double acting pull stroke adjustment type
● Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper.
Low hydraulic pressure: Double acting type
● Φ32 to 100 mm [1.260 to 3.937 in] cylinder bore. Conforms to ISO standards. Pneumatic-hydraulic converter can be used for simple low-speed operation control of a cylinder operated by low hydraulic pressure.
Valpack double acting type
● Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Integrated solenoid valve and cylinder for less wasted air consumption within piping and reduced piping work requirements.
End keep double acting type
● Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure.
Double acting brake type
● Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with brake mechanism to maintain intermediate stop and position.