Category
Category
F10 Single Valve Unit
● For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width. Low power consumption. A new type of solenoid valve for single and double use. A wide range of possible variations: reducer fitting, etc.
F10 Monoblock Manifold Base Piping
● For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width. Output block is switched with the valve side to allow use as direct piping.
F10 Monoblock Manifold Direct Piping
● For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width. Direct piping type manifold for outstanding cost performance.
F10 Monoblock Manifold Wire Saving Base Piping Type
● For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width. Wiring specifications provided include flat cable connector type and D-sub connector type.
F10 Monoblock Manifold Wire Saving Direct Piping
● For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width. Wiring specifications provided include flat cable connector type and D-sub connector type.
F10 Monoblock PC Board Manifold Base Piping Type
● For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width. MIL type 20-pin flat cable provides both wire saving and good cost performance.
F10 Monoblock PC Board Manifold Direct Piping
● For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width. MIL type 20-pin flat cable provides both wire saving and good cost performance.
F10 Split Manifold Non-plugin Type
● For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width. Simple manifold increase or decrease. Variable number of units provides flexibility.
F10 Split Manifold Type Plugin Type
● For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width and wire saving type manifold. Addition of wiring enables simple manifold increase or decrease.
F10 Split Serial Transmission Manifold Type
● For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width. Serial transmission compatible manifold. Selectable wiring position (transmission block): left or right.
F10 valve Easy Assembly Type Manifold Non-plug in Type
・For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width. This allows for easy addition, removal and assembly, as the internal wiring is connected simply by linking the manifold bases.
F10 valve Easy Assembly Type Manifold Plug in Type
・For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width. This allows for easy addition, removal and assembly, as the internal wiring is connected simply by linking the manifold bases.
F10 valve Easy Assembly Type Manifold Serial Transmission Type
・For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width. This allows for easy addition, removal and assembly, as the internal wiring is connected simply by linking the manifold bases. Serial transmission compatible manifold.