Category
Category
Mini guide sliders MGA series
● Φ4.5 to 32 mm [0.177 to 1.260 in] cylinder bore. Standard setter for table type with compact, high-rigidity linear guide. A wide range of variations enables a greater degree of mechanical design freedom.
Mini Guide Table MGT series
● Integration of compact, high-precision, high rigidity table, guide, and cylinder. Uses a 4-point contact linear guide. Metal stopper equipped as standard, shock absorber also equipped.
Basic cylinders
● Φ6 to 125 mm [0.236 to 4.921 in] cylinder bore. A new cylinder with direct mounting for minimal size and minimal weight. Basic cylinders in a wide range of variations that allow creation of just about any type of production process. H1 grease standard compliant.
Jig cylinder with guide SGDA serias
● Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. Perfect for use as a conveyor line stopper or lifter. A selection of four mounting types to match the mounting environment and two different port location directions.
Rod slider ARS series
● Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Workpiece table with twin rod cylinder and seven guides for high accuracy, high rigidity, and high output.
Z slider ZS series
● Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Thin actuator with linear guide. Twin rod for high output.
High multi cylinders YMDAG series
● Φ6 to 20 mm [0.236 to 0.787 in] cylinder bore. Square body and six-side mounting enable compact and direct mounting.
Alpha series twin rod cylinders ATBDA series
● Φ10 to 32 mm [0.394 to 1.260 in] cylinder bore size. Two rods do not require guides. A linear ball bearing maintains high non-rotating accuracy and tip deflection accuracy, even at full stroke.
Axis cylinders
● Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder and both side guides are integrated with each other for high non-rotating accuracy. Can be equipped with a compact shock absorber unit.